The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / E series on NMEA 2000 has limited info

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E series on NMEA 2000 has limited info
09-21-17, 01:23 PM
Post: #1
ThreeAces Offline
Junior Member
**
 		Posts: 5
Joined: Jun 2017
Reputation: 0
E series on NMEA 2000 has limited info
I have an e series 12" Hybrid with twin 225 mercury outboards. I just installed a new Vessel View 502 (a simrad product) along with a NMEA 2000 back bone. With the proper converter I also added the E series to the backbone. After bringing everything to life, I was able to see the engine RPM, temp, oil pressure, but I am not getting the engine trim on the Raymarine. I can see this displayed on the vesselview 502, so I know the information is on the network. Is there a mapping routine or something I am missing? ANy help is appreciated. I have the latest software, 19.03
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E series on NMEA 2000 has limited info - ThreeAces - 09-21-17 01:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication