Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mfd selection
09-23-17, 06:08 PM (This post was last modified: 09-25-17 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: mfd selection
Budget is driving me to the following configuration if the C120W and C90W can do it given its network limitations.

Presently have C120W, C90W, Autohelm 6000, Horizon VHF Matrix AIS GX2100

Would like to add a RD424HD radome and have it displayed on both of the MFD's. Would also like to interface the AIS with the MFD's so that AIS targets appear on the chart plotters. Would like to be able to track AIS targets on the MFD chart plotters as well as radar overlay so that I can set alarms, etc. Last, would like to add SR100 sirius weather radio and have it also displayed on MFDs, ideally as overlay.

Also have an Autohelm 6000 but don't necessarily need it to be interfaced with the chart plotters.

Is this possible or will I need to upgrade the C120/90W MFDs?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
mfd selection - jack bullock - 09-08-17, 02:23 PM
RE: mfd selection - jack bullock - 09-23-17 06:08 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)