The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Seatalk 1 to Existing NMEA 2000 Network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk 1 to Existing NMEA 2000 Network
04-07-16, 07:43 AM
Post: #1
baja bum Offline
Junior Member
**
 		Posts: 24
Joined: Feb 2016
Reputation: 0
Seatalk 1 to Existing NMEA 2000 Network
I would like to interface an ST60+ Depth to an existing NMEA 2000 Network. I believe the ST1 to STNG converter should be connected as an extension of the NMEA 2000 backbone with power being supplied by the existing NMEA 2000 network. If I terminate the converter on one end and the NMEA 2000 backbone on the other end, how do I connect the converter backbone to the NMEA 2000 backbone using the blue connector on the converter? Is there a blue connector devicenet adapter cable available similar to the A06045 and A06046?

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Seatalk 1 to Existing NMEA 2000 Network - baja bum - 04-07-16 07:43 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication