Question/suggestion on System Upgrade (partial or full?)

[Chuck - Raymarine - Moderator]

sberens,

Q1. How would I interface to the ST60+?
A1. This would be accomplished via a SeaTalk to SeaTalkng Converter Kit. Please click here to view a FAQ addressing this subject.

Q2. Fishing is not the top priority but it will be used on occasion in the Great Lakes (Lake Michigan) with water depth generally less than 300 feet but up to 500 feet.
A2. Noted.

Q3. I currently have an older radome and am probably looking at replacing with similar (maybe Quantum) as I prefer better detail close in during poor visibility conditions.
A3. Noted. Quantum has excellent performance at close ranges.

Q4. The most important features that I really want are GPS and Radar. Additional desires would be around speed, temp, depth, engine monitoring (two 7.4L Mercruiser MPIs) and easily viewable screen.
A4. All Raymarine MFDs are designed to support chartplotting features when a chart card is present within the memory card reader of one of the MFDs and the system is receiving GPS data via the internal GPS receiver of one of the MFDs or from an external GPS sensor (ex. Raystar 150 GPS Sensor ... the latter may be necessary if the MFDs will be installed in a location which does not afford at least one of them to have an unobstructed view of the skies overhead. When networked together via an Ethernet network, the Axiom Pro S MFDs will share all system resources (except for NTSC/PAL video sources). It is recommended that a pair of Axiom Pro S MFDs and a compatible CHIRP transducer or compatible 600W or 1kW 50/200kHz transducer (a less expensive alternative) be considered for the vessel.

Regarding engine interfacing, Please click here to view a FAQ addressing the subject of interfacing the engines. Should the engines feature Mercury's SmartCraft technology, then Mercury Marine's SmartCraft to NMEA 2000 Engine Gateway would be recommended. Should the engines not feature SmartCraft technology, then it is recommended that Fox Marine be contacted to determine whether their engine gateway may be applicable to your Mercruiser engines.

Q5. I can also update the VHF radio.
A5. A Ray60 or Ray70 (the latter has a built in hailer feature) would be recommended for this applications.

Q6. I would really like one giant display to allow split screen and detailed viewing. However, probably looking to have two smaller MFDs side-by-side. Space shouldn't be a big concern. Guessing two 9" MFDs.
A6. Noted. Then a pair of 9" Axiom Pro S MFDs would be recommended for this application.