Raymarine forum / Raymarine Forums / Autopilots v / Heading COG Mismatch (E125/ACU400/EV-1/P70/I70)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heading COG Mismatch (E125/ACU400/EV-1/P70/I70)
09-28-17, 03:27 PM (This post was last modified: 09-28-17 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Heading COG Mismatch (E125/ACU400/EV-1/P70/I70)
lwitty,

Should the heading problem persist when the system is reduced to the Raymarine products, then I would recommend that the EV-1 CCU be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

Q - is there a digital transducer I can install that will bypass the ITC-5 and go direct to SeaTalkng.
A- Yes. Will the transducer be installed on a flat or will it be installed on a surface having deadrise?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Heading COG Mismatch (E125/ACU400/EV-1/P70/I70) - Chuck - Raymarine - Moderator - 09-28-17 03:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication