The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS and older MFD's

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS and older MFD's
10-05-17, 09:59 AM
Post: #1
Eirinnrose Offline
Junior Member
**
 		Posts: 31
Joined: Dec 2016
Reputation: 0
AIS and older MFD's
Hi Chuck, I have two 12 year old E120 displays connected with Sea Talk which are also connected to auto pilot, wind and Nobeltec AIS receiver. I'm looking to replace the Nobeltec with an AIS Transceiver (most likely the Raymarine 650 or Digital Antenna AIT2000) and understand from reading posts that I must connect the AIS transceiver to one of the MFD's and not through Sea Talk. In connecting to one MFD will the AIS signals automatically show on the second MFD or do I need to connect directly to both and is there adequate plugs for completing the connection with everything else connected?
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
AIS and older MFD's - Eirinnrose - 10-05-17 09:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication