The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / EV100 with p70 on Seatalk1?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV100 with p70 on Seatalk1?
04-07-16, 05:21 PM
Post: #1
marchem Offline
Junior Member
**
 		Posts: 24
Joined: Mar 2016
Reputation: 0
EV100 with p70 on Seatalk1?
Current system is 3 ST60 instruments, an e7D MFD, and E22158 ST1 & STng converter. All work fine and talk together.

I now want to add an EV100 wheel autopilot pack. I understand that the EV1 and ACU100 will use STng to talk to the e7D. My question is if I can also use the p70 control head by connecting it to the ST1 instrument ST1 chain using an ST1 to STng cable (A06047?) and then use either the p70 or e7D to control the autopilot. It also makes the wiring easier, since the p70 is in the same pod as the ST60s.
Rob Franks
Catalina 310 #31
Santa Cruz, CA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV100 with p70 on Seatalk1? - marchem - 04-07-16 05:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication