Raymarine forum / Raymarine Forums / Thermal Cameras v / Axium and T253

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axium and T253
10-13-17, 10:24 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axium and T253
Welcome to the Raymarine Forum zelatore,

While the Axiom Pro MFDs feature an analog video input interface to support receiving analog video from T-Series thermal cameras, FLIR thermal cameras having a NTSC / PAL video interface, deck/engine room cameras having a NTSC / PAL video interface, etc., the Axiom MFDs do not. However, a workaround exist for Axiom MFDs in that a compatible third party NTSC/PAL to IP video encoder(s) may be used to encode the video signal from the T-Series thermal camera. This workaound has been successfully demonstrated using the AXIS brand M7011 Video Encoder.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axium and T253 - zelatore - 10-12-17, 08:14 PM
RE: Axium and T253 - Chuck - Raymarine - Moderator - 10-13-17 10:24 AM
RE: Axium and T253 - zelatore - 10-18-17, 12:06 AM
RE: Axium and T253 - zelatore - 10-23-17, 01:31 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication