Axium and T253

[Chuck - Raymarine - Moderator]

zelatore,

Interfacing the Axis M7011 is a very simple task. As the Axis M7011 is a POE device, it will need to be powered by a POE injector (ex. Raymarine R32141 POE Injector, FLIR 41113746 POE Injector, etc.) which will in turn be connected to the Axis M7011 via an appropriate length of marine grade Ethernet cable which include POE leads within its cable. The unpowered end of the POE injector will in turn be connected to either the MFD's Ethernet Network socket or to the system's RayNet Network Switch via an appropriate length of RayNet (F) to RJ45 (M) Cable. Finally, connect the camera's BNC connector to the Axis M7011's BNC connector.