Raymarine forum / Raymarine Forums / Product Selection Assistance v / C120 compared to a C127

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120 compared to a C127
04-08-16, 12:55 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C120 compared to a C127
Welcome to the Raymarine Forum Grandsport29,

Should the C-Series Classic MFD be interfaced to a DSM250 fishfinder sounder module, radome, or open array radar pedestal, then these devices would additionally need to be replaced when replacing a C-Series Classic MFD with an a/c/e/eS-Series MFD. Any transducer which is presently mated to a DSM250 may be adapted (w/E66066 Transducer Adapter) for use with an ax7, cx7, e7D, ex7, or eSx7 MFD. Please click here to view a FAQ providing more complete information on this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C120 compared to a C127 - Grandsport29 - 04-07-16, 10:04 PM
RE: C120 compared to a C127 - Chuck - Raymarine - Moderator - 04-08-16 12:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication