The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / NAVAIDS v / RS125 Connected to e120 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RS125 Connected to e120 MFD
10-24-17, 08:57 PM
Post: #1
Eirinnrose Offline
Junior Member
**
 		Posts: 31
Joined: Dec 2016
Reputation: 0
RS125 Connected to e120 MFD
I have two e120 MFD displays with a Raystar RS125 receiver connected via SeaTalk, which has been connected without modification for 12 years. Last year due to slow start up I replaced the battery in the receiver and it has worked well for the past year until recently. Today I had a flashing red light and no fix on MFD. After several tries through normal start up and shut down, I turned the power off to the MFD to create a hard shutdown. After several minutes the MFD finally received a fix and trying it several times afterward through normal shut down it appears to work normal. Could this have been caused by a failed battery in the receiver or should I look elsewhere if it happens again?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RS125 Connected to e120 MFD - Eirinnrose - 10-24-17 08:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication