The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / 3D Real Vision Transducer placement (Yacht)

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3D Real Vision Transducer placement (Yacht)
11-17-17, 01:28 PM
Post: #1
watsala Offline
Junior Member
**
 		Posts: 37
Joined: Nov 2017
Reputation: 0
3D Real Vision Transducer placement (Yacht)
Hello,

I am looking for some input about putting 3D Real Vision Transducer on a Hood 38 yacht and whether I can get away with 1 transducer instead of 2.

I am currently thinking forward of the keel on the center line on a fairing block would be best:

https://imgur.com/a/gq0TM

Q: Does the fore/aft line of the transducer need to be parallel to the waterline/oceanfloor?

https://imgur.com/a/KPt8g
https://imgur.com/a/l8HBv

I am also concerned that the threaded part of the transducer wont be long enough to go through the wedged fairing block and the hull.

Has anyone else done this on a yacht?

I was going to use the bronze transducers as I hear the plastic ones still have a few teething problems?

Cheers

W


Attached File(s)
.jpg  20171117_154652_resized.jpg (Size: 474.97 KB / Downloads: 488)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
3D Real Vision Transducer placement (Yacht) - watsala - 11-17-17 01:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication