[CA] Import failed- VoyagePlanner to Axiom

[Mgarsal]

I get “import failed” when trying to import a gox file created by the Voyage Planner (windows).

I updated the Axiom to latest version, I have the latets charts in the SD card, this is my procedure:

- Create route using click and point, I created two routes with 99 and 65 waypoints.

- Route names are NM-PlantYICW and NM-PlantYHawk
-Right click on route, export, route appears on the transfer container
-At the transfer container click the arrow, file on disk, gps format, standard gpx
-Delete route from transfer container
-Repeat for other route
-SD card is blank, formated with fat32, 32GB
-Insert card in Axiom, my data, import/export, import from card, select card
-Both routes show up with a gps extension ( 29.1kb and 42.6kb sizes)
-Click on one the first time and says “import failed”.
-If you go back and check waypoints in the Axiom it shows it has actually copied one waypoint
-Subsequent tries I get “A waypoint with name WPT099 already exists in the lect and option”: keep both, replace and cancel. Regardless of the answer it says “import failed” and if you go check it has copied another waypoint

What do I do?