Raymarine forum / Raymarine Forums / Autopilots v / P70 No pilot error and mode page blank

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
P70 No pilot error and mode page blank
11-30-17, 04:16 PM (This post was last modified: 12-01-17 09:00 AM by Chuck - Raymarine - Moderator.)
Post: #3
rlschmidt Offline
Junior Member
**
 		Posts: 30
Joined: Jul 2016
Reputation: 0
RE: P70 No pilot error and mode page blank
In the P70 system diagnostics the only device that is seen is the p70r.
The ACU 200 shows a red power on LED for the seatalk indicating power is being supplied to the network, and the 12V LED is also on. I don't know where the CCU status indicator is, but if the various colored panels under the seatalk cable socket are in fact LED's none of them are light. The power is obviously being supplied to the buss, since the p70 is powered by the ACU power output on the network.

I also removed and re-seated every connector on the seatalk buss to insure they were properly seated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: P70 No pilot error and mode page blank - rlschmidt - 11-30-17 04:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication