Axiom Not Saving Quantum ID and PW

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum oldersalt,

I would recommend that any waypoint, route, and track data within the MFD be backed up and the a Factory Reset be commanded on MFD. Should the problem persist thereafter, then please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, it is recommended that the Quantum radome be powered from a circuit which may be switched ON/OFF independently from that of the system's other marine electronics. Please click here to view a FAQ addressing recommendations for powering the marine electronics. While it is possible for a single power circuit to supply power to the devices you have identified, it would not be considered a best practice and may have operational implications (ex. shutting down the entire system to wake the Quantum radome from sleep mode). Should the problem with the Quantum radome persist, then please indicate how much Wi-Fi signal strength in dB is being received from the MFD at the Quantum radome's location. Quantum 24W radomes are not suitable for all applications. As indicated within the referenced FAQ, insufficient signal strength may necessitate installation of a Quantum 24C with data cable instead of a Quantum 24W.