The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / COG Vector C Series MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
COG Vector C Series MFD
12-04-17, 03:04 PM
Post: #1
Florence Offline
Junior Member
**
 		Posts: 2
Joined: Nov 2017
Reputation: 0
COG Vector C Series MFD
My vessel has a C Series setup about 10 years old. I recently updated the GPS antenna to the RS 150 as the original antenna was becoming slow at picking up a fix. The new system is certainly fast and accurate. However, the COG Vector is about 20 degrees out to Starboard on all headings. This coincidentally (?) is the local magnetic variation of 19 degrees East. I have the variation set to auto on system setup. I have tried changing this manually but it makes no difference. What do you suggest?
Also the screen no longer displays the satellites being detected. This is minor and I can live with this if there is no easy fix.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
COG Vector C Series MFD - Florence - 12-04-17 03:04 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication