Raymarine forum / Raymarine Forums / Multifunction Displays v / Importing Waypoints from Voyager Planner to a C-95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Importing Waypoints from Voyager Planner to a C-95
12-07-17, 11:52 AM (This post was last modified: 12-07-17 11:55 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Importing Waypoints from Voyager Planner to a C-95
Welcome to the Raymarine Forum Gordon,

Please note that the latest version of software for the a/c/e/eS/gS-Series MFDs is v19.03, not v9.3 as you have indicated. The reported issue has resulted from violation of one of the constraints documented within the FAQ found here. More specifically, several of the waypoints within your GPX file feature comments exceeding the maximum number of characters specified within the referenced FAQ. Accordingly, it is recommended that your waypoints within VP be edited to reduce the length of your comment strings to be less than the maximum number of characters specified within the referenced FAQ and that afterwards a new GPX file be exported from VP.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Importing Waypoints from Voyager Planner to a C-95 - Chuck - Raymarine - Moderator - 12-07-17 11:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication