Quantum Radar power cord connection

[[email protected]]

I am assessing to buy a Quantum radar to replace my old JRC 1000 MK2. Planning to use wifi for data and to use the old power wire until I take the mast down and install the Raymarine ethernet and power cables. I want to make sure what the JRC power wires to be spliced are the correct ones since the NMEA 0183 mnemonic codes are different for each manufacturers. Could you let me know the pairing of each of the power cables from quantum correspond to the power wires based on the scanner NKE 1053 below (e.g Q red wire with JRC Red 1 A) ? Really appreciate it. I want to make sure certified marine electrician does it properly (my boat is in France and language barrier always an issue).

P1
RED ----O 1A
BLUE----O 2A
ORN-----O +12V

P2

YELLOW------O TUNV
NO COLOR---O TI/GS
SHIELD-------O TIR/GRS
COAX---------O VD
SHIELD-------O VDR
WHITE--------O BZ/TUNJ
GRN-----------O PW