Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Chirp channel selection Axiom 9 RV-100 transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Chirp channel selection Axiom 9 RV-100 transducer
12-13-17, 04:07 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Chirp channel selection Axiom 9 RV-100 transducer
Welcome to the Raymarine Forum Greg,

The feature which you have referenced is not applicable to the RV transducers. These CHIRP selection features are applicable to 1kW CHIRP CP470/CP570 compatible transducers. Should the Axiom RV MFD be interfaced to a Y-Cable, which in turn was interfaced the RV-100 and to a 1kW CHIRP CP470/CP570 compatible transducer / transducer pair, then the feature which you have inquired about would be accessible. With respect to conical CHIRP sonar imagery, RV and DownVision transducers exclusively support high CHIRP.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Chirp channel selection Axiom 9 RV-100 transducer - Chuck - Raymarine - Moderator - 12-13-17 04:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication