The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / RD418HD out of sync with a97

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RD418HD out of sync with a97
04-12-16, 09:25 PM
Post: #1
ssjohnson1 Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
RD418HD out of sync with a97
OK....the Radar and the MFD installed last summer do seem to work great...except that I have to constantly adjust the offset of the radar scan (may not be using the correct verbiage here...) when I change directions. For example, when sailing down a coast (Michigan in this case) I have to adjust the radar image to match the chart for the shoreline... maybe 10-20 degrees. Then I am good....until I change directions. [censored]!
Once set for my system, should this need to be adjusted?? Is there something else I should be looking at? Is there an initial config that I have missed?? Sure would like to know if I have company or am just 'special'....
TIA
Find all posts by this user
Thread Closed 


Messages In This Thread
RD418HD out of sync with a97 - ssjohnson1 - 04-12-16 09:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication