Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Navionics Platinum+ maps shared between Axiom displays?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics Platinum+ maps shared between Axiom displays?
12-27-17, 10:30 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Navionics Platinum+ maps shared between Axiom displays?
Tony,

Thanks for confirming that you have interfaced the MFDs to one another via an Ethernet network. However, at this time, it would not be recommended that more than one Navionics chart card be present within the system. Should you additionally have a LightHouse and/or C-Map chart cards, then they may also be used simultaneously with the Navionics chart card within the system. As indicated, Raymarine is currently seeking a correction to the reported behavior and would recommend that the system be used as indicated within this response until this problem has been corrected within a LightHouse 3 software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Navionics Platinum+ maps shared between Axiom displays? - Chuck - Raymarine - Moderator - 12-27-17 10:30 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication