Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Navionics Platinum+ maps shared between Axiom displays?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics Platinum+ maps shared between Axiom displays?
01-02-18, 02:07 PM (This post was last modified: 01-02-18 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Navionics Platinum+ maps shared between Axiom displays?
George,

Thanks for the additional information concerning the chart sharing problem ... specifically, the information that
- the problem involves a Navionics+ chart card
- prior to a Navionics Freshest Data update, the cartography from the Navionics+ chart card was able to be accessed from any of the system's networked Axiom MFDs
- following the Navionics Freshest Data update, the cartography from the Navionics+ chart card was only able to be viewed within the MFD

This additional information has been forwarded to the engineering team to support investigation and correction of the Navionics chart sharing issue. This problem is currently being investigation as part of the LightHouse v3.3.x software development effort.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Navionics Platinum+ maps shared between Axiom displays? - Chuck - Raymarine - Moderator - 01-02-18 02:07 PM

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication