Raymarine forum / Raymarine Forums / AIS v / [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
01-03-18, 01:27 PM
Post: #8
O1dSoldier Offline
Junior Member
**
 		Posts: 25
Joined: Feb 2016
Reputation: 0
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
Hi Chuck,

Thanks again for the prompt reply. To ensure I understand correctly. Since I have the red SeaTalk wire from the MFD connected to the Red from the SHS and both the red and green wires from the GPS I should disconnect the switched power from the SHS +/- 12v inputs and add them to the SeaTalk side? I updated the diagram to reflect what I believe you are telling me, please see attached.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram - O1dSoldier - 01-03-18 01:27 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication