The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / ST7002 does work with the E22158 converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST7002 does work with the E22158 converter
04-14-16, 06:26 AM
Post: #1
joaquim prado Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
ST7002 does work with the E22158 converter
Hi, I have connected the ST7002 to the E22158 seatalk to seatalk ng converter (with the apporpriate cable).The conveter is connected to a backbone cable.
Then I connected the SPX30 autopilot to the same backbone via its seatalk ng connection with a spur cable.
It does no work as the ST7002 reads "NO PILOT".
Can you please help me?
In the meantime, in order to have the autopilot working, I have connected the ST7002 to SPX30 via its seatalk connection and the SPX30 to the c125 MDF via seatalk ng. Is this OK? What am I loosing in terms of functionality?
Thank you very much,

Joaquim
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST7002 does work with the E22158 converter - joaquim prado - 04-14-16 06:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication