Raymarine forum / Raymarine Forums / Autopilots v / Evolution AP not steering to waypoints without getting lost

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Evolution AP not steering to waypoints without getting lost
04-14-16, 01:53 PM
Post: #4
Steve - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 318
Joined: Feb 2016
Reputation: 0
RE: Evolution AP not steering to waypoints without getting lost
These options would make a difference when using the Track function because the autopilot is steering to a course or rhumb line (XTE cross track error) as opposed to just a heading in Auto. The default would be the Speed, so make sure it is set to SOG, and it could be effected that far down the line because of the change in course by current, side wind, side waves and this is when the autopilot is trying to correct causing the S-ing.

How was the C80 connected? Through a Seatalk to Seatalk NG converter or through a NMEA converter? The C80 would not have a direct connect to a Evolution autopilot it doesn't have Seatalk 1 or NMEA 0183 inputs?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Evolution AP not steering to waypoints without getting lost - Steve - Raymarine - Moderator - 04-14-16 01:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication