The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [CA] Axiom 9 IPV7 Waterproof

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9 IPV7 Waterproof
01-23-18, 04:15 PM (This post was last modified: 01-23-18 04:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
cdrein88 Offline
Junior Member
**
 		Posts: 3
Joined: Jan 2018
Reputation: 0
[CA] Axiom 9 IPV7 Waterproof
I recently purchased an Axiom 9 with RV-100 transducer which I'm using on a mobile application. This is mounted to an inflatable boat which I am rigging and unrigging with every use.

The power cable for this unit has two connections. One is a three conductor cable to be connected to the battery and the other end is what I'm guessing is a NMEA 2000 connector. This connector is not capped and I am not using it. Does this need to be plugged to keep the IPV7 rating of the unit? I do not see a plug included with the unit.

Thanks

Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom 9 IPV7 Waterproof - cdrein88 - 01-23-18 04:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication