(DG) ST6002 Autopilot integration with Axiom 12

[Derek - Raymarine - Moderator]

Hi tafika2

Thank you for your enquiry.

Although you do not say what type of course computer you have, I suspect it is connected to the AXIOM 12 via the SeaTalk to STng converter and the ST6002 control head is connected via SeaTalk to the autopilot computer.

In this case, the AXIOM will not control the legacy autopilots directly, you can still create a route and select the FOLLOW option, however, if you want the Autopilot to follow that route too - you will need to engage AUTO on the ST6002 and then select TRACK mode on the ST6002, after you have acknowledged the FOLLOW TRACK alarm, the autopilot will then follow the route on the AXIOM.

regards