[CA] Where/how to install transducer on a drift boat.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jon,

Unfortunately the application which you have described is unique and would require a custom mount. Hulls such are yours are shaped more like a sailboat's hull with respect to its waterline footprint and a thru-hull transducer (ex. CPT-80 Bronze Transducer or CPT-70 Plastic Transducer) would typically be recommended for the application. Otherwise, it would be necessary to have a custom retractable mount fabricated to hold the transducer securely in the water and properly oriented. You may want to consider reaching out to other forums / owners having hulls of similar design for ideas concerning the design and fabrication of such a mount.