Raymarine forum / Raymarine Forums / Autopilots v / [CA] SPX 10 and ST 70 software update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] SPX 10 and ST 70 software update
02-02-18, 03:54 PM (This post was last modified: 02-02-18 04:22 PM by Chuck - Raymarine - Moderator.)
Post: #5
2thfish Offline
Junior Member
**
 		Posts: 14
Joined: Jan 2018
Reputation: 0
RE: [CA] SPX 10 and ST 70 software update
Chuck -- I have disconnected everything except the master MFD, the radar and the down vision transducer -- the later two are hooked to the master MFD. Do I need to disconnect those as well? i am attempting to update the SPX10 first. I've attached another screen shot of exactly what is on the micro card. There are my system backups and tracks and the open SPX v3 file folder. I still get a message that no update files are found. Any guidance will be greatly appreciated. Thanks. Gordon
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] SPX 10 and ST 70 software update - 2thfish - 02-02-18 03:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication