(DG) Type 300 compatibility question

[Derek - Raymarine - Moderator]

Hi Matt,
Thank you for your enquiry.

The T300 computer uses an earlier form of SeaTalk and so is best not connected to STng via a converter. if you can locate a similar generation control unit, STxxx1/ Stxxx2 then this would be preferable, click here for further details on alternatives.
The later version of the ST6001 and St7001 are compatible, some aspects of calibration may not be accessible, but generally the normal operation modes are all accessiable and most of the calibration settings are able tobe edited to suit - bear in mind calibration settings are stored in the computer so changingt eh control unit will not affect them.

before changing to the current P70s and p70Rs control heads, refer
to this FAQ here for more information.

The T300 requires a rudder reference unita nd so a new one must be fitted.

regards