Raymarine forum / Raymarine Forums / Fishfinders v / [CA] RV Transducer(s) placement help

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RV Transducer(s) placement help
02-15-18, 04:18 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] RV Transducer(s) placement help
Q1. I am wondering if the rv-200 might be the way to go?
A1. Unfortunately, there is no way to be certain about this and it is likely that low CHIRP conical sonar (the sonar technology supported by the RV transducer which will perform better than the other supported sonar technologies at higher speeds) would drop out sooner than would occur with a properly installed RV transducer pair.

Q2. Assuming clean water what is a realistic speed to expect the rv transducers to operate?
A2. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] RV Transducer(s) placement help - Chuck - Raymarine - Moderator - 02-15-18 04:18 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication