The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / (DG) Powering AIS 100 splitter

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Powering AIS 100 splitter
02-16-18, 07:05 AM (This post was last modified: 02-16-18 09:37 AM by Derek - Raymarine - Moderator.)
Post: #1
wheatstm Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
(DG) Powering AIS 100 splitter
Hello Raymarine Technical Support,

I have an AIS splitter 100 and wanted to confirm when it needs to be powered up. Am I correct in thinking all receive functions (VHF, AIS, FM radio) work with no power applied and power is only needed for VHF and AIS transmit functions?

The reason I ask is the VHF, AIS, and FM radio are all on separate breakers and certainly the VHF and FM radios are sometimes used on their own without turning on the rest of the navigation instrumentation (MFD, ST60s, AIS). I don’t wish to leave the splitter on continuously and am trying to work out where to power it from. My thought had been to diode “OR” power from the VHF and Nav Instrument breakers to feed it.

Thank you for your assistance.
Mike
Find all posts by this user
Thread Closed 


Messages In This Thread
(DG) Powering AIS 100 splitter - wheatstm - 02-16-18 07:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication