Raymarine forum / Raymarine Forums / Fishfinders v / [CA] RV Transducer(s) placement help

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RV Transducer(s) placement help
02-16-18, 10:28 AM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] RV Transducer(s) placement help
Scott,

Unfortunately, your photos cannot be viewed without creating an account where you posted them. Please re-size the photos to be less than 500kb (100kb should be sufficient and then attach them to a response to this post.

Regarding the B744V fishfinder transducer, should its cable be terminated in a plug which was designed to be directly mated to the DSM300, then it may be adapted (A80496) to be mated to the 50kHz/200kHz/CHIRP transducer socket of the Axiom Pro RVX MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] RV Transducer(s) placement help - Chuck - Raymarine - Moderator - 02-16-18 10:28 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication