[CA] M232 Mounting Location

[jkspain]

Thanks Chuck.

The radar is currently mounted on a short pedestal (Approximately 12 inches high). I will investigate potential modifications to allow the M232 to be mounted above and behind the radar as you describe. However, mounting the M232 even higher above the CG will increase the pitch and roll motion the of the camera and the M232 image is not gyro stabilized.

At slow speed there is no significant bow rise, however at planning speeds there is a modest bow rise (about 10-15 degrees).

I you have a recommended source for thermal camera pedestals please send a link.

Jon