Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] Getting NMEA 0183 to a VHF

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Getting NMEA 0183 to a VHF
02-23-18, 10:11 AM (This post was last modified: 02-28-18 11:17 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Getting NMEA 0183 to a VHF
Welcome to the Raymarine Forum Stephen,

Should the E-Series Classic MFDs within the system have been updated with latest available Raymarine product software update and should the E-Series Classic MFD which you will be seeking to use for this purpose be configured as the system's Data Master E-Series Classic MFD, then it would indeed be possible to use the E70196 VHF NMEA 0183 to STng Converter Kit to supply GPS data to the VHF radio whenever,
- the MFD is powered ON, and
- the MFD is receiving a GPS position FIX from a GPS data source which has been interfaced to either the MFD's SeaTalk communications interface or NMEA 0183 communications interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Getting NMEA 0183 to a VHF - Chuck - Raymarine - Moderator - 02-23-18 10:11 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication