The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] EV150 to existing NMEA 2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] EV150 to existing NMEA 2000
02-24-18, 07:25 AM (This post was last modified: 02-27-18 02:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
Dave C Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2018
Reputation: 0
[CA] EV150 to existing NMEA 2000
I'm new to this forum and could use some help. When my boat was re-powered a NMEA 2000 network was created for the Suzuki motor. I have connected my E97 to the network through a DeviceNet adapter in order to use the GPS data for fuel management.
My question has to do with connecting an EV150 to the NMEA network. Can I assemble the autopilot Sea Talkng network omitting the power lead and then tie this network to the NMEA with a single Devicenet adapter? From what I've read you cannot have more than one power source on these networks. Is this correct thinking?
Thanks for any help.
Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] EV150 to existing NMEA 2000 - Dave C - 02-24-18 07:25 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication