Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Axiom 9 with Seatalk-SeaTalkng converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9 with Seatalk-SeaTalkng converter
02-25-18, 03:16 PM (This post was last modified: 02-26-18 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #5
jorbro Offline
Junior Member
**
 		Posts: 26
Joined: Feb 2018
Reputation: 0
RE: [CA] Axiom 9 with Seatalk-SeaTalkng converter
Hi Chuck
You recommend that I supply the ST4000+ from the SeatalkNG converter via the spur cable but reading the ST4000+ Manuel it recommends a 7Amp fuse in the 12V feeding cable – probably to feed the tiller drive. I doubt I can avoid feeding the seatalk bus from ST4000+ or?
Rg
Jorgen
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Axiom 9 with Seatalk-SeaTalkng converter - jorbro - 02-25-18 03:16 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication