European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] EV150 to existing NMEA 2000
|
|
02-27-18, 03:15 PM
(This post was last modified: 02-27-18 03:17 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA] EV150 to existing NMEA 2000
Welcome to the Raymarine Forum Dave,
As indicated within the FAQ found here, Raymarine does not recommend interfacing Raymarine equipment directly to an engine manufacturer's NMEA 2000 backbone. As you have indicated, a SeaTalkng / NMEA 2000 backbone should only be powered from a single power insertion point. That said, unlike the ACU-200 and ACU-400, the ACU-150 is not designed to output power to a SeaTalkng / NMEA 2000 backbone. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA] EV150 to existing NMEA 2000 - Dave C - 02-24-18, 07:25 AM
RE: [CA] EV150 to existing NMEA 2000 - Chuck - Raymarine - Moderator - 02-27-18 03:15 PM
RE: [CA] EV150 to existing NMEA 2000 - Dave C - 03-05-18, 07:37 PM
RE: [CA] EV150 to existing NMEA 2000 - Chuck - Raymarine - Moderator - 03-06-18, 09:51 AM
|
User(s) browsing this thread: 2 Guest(s)