Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] Shared Charts on 2 MFD in one network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Shared Charts on 2 MFD in one network
02-28-18, 11:30 AM (This post was last modified: 02-28-18 11:30 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Shared Charts on 2 MFD in one network
Welcome to the Raymarine Forum Joachim,

Unfortunately, when using the LightHouse v3.2.x or LightHouse v3.3.x software releases, Axiom and Axiom Pro MFDs may not share Navionics cartography with other networked Axiom or Axiom Pro MFDs. This feature is expected to be addressed in the LightHouse v3.4x software update currently scheduled for release in mid-March (date subject to change depending upon testing results). You may want to consider signing up to become a beta tester for the LightHouse v3.4.x software release by following the directions found here. In this case, I would recommend that you be clear to indicate that your Axiom MFD is presently unable to share Navionics charts with another networked Axiom MFD and that the MFDs have been interfaced to one another via an Ethernet network.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Shared Charts on 2 MFD in one network - Chuck - Raymarine - Moderator - 02-28-18 11:30 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication