The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Sending routes to C80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sending routes to C80
04-19-16, 06:30 PM
Post: #1
weisbergj Offline
Junior Member
**
 		Posts: 23
Joined: Feb 2016
Reputation: 0
Sending routes to C80
I have a Raymarine C80 on my boat, connected to an Actisense NDC-4, which is also connected to a Simrad VHF/AIX receiver, Raymarine sounder, and VesselView.

I have a Windows laptop connected to the NDC-4, running Coastal Explorer. CE receives all of the data from all the connected devices. And the C80 is receiving data from other devices via the NDC-4, such as AIS.

However, when I try to send a route from CE to the C80, it doesn't work. On the C80, I select "Receive via NMEA 0183", and in CE I click "send to GPS", using the NDC, with either NMEA 0183 or the Raymarine protocol selected.

Nothing seems to happen. I've also tried to send a single waypoint, without success.

Any suggestions?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sending routes to C80 - weisbergj - 04-19-16 06:30 PM
RE: Sending routes to C80 - weisbergj - 04-24-16, 02:33 PM
RE: Sending routes to C80 - weisbergj - 05-01-16, 06:05 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication