The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Thermal Cameras v / [CA] FLIR M232 and e165

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] FLIR M232 and e165
03-03-18, 09:08 PM (This post was last modified: 03-05-18 04:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
tjdurocher Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2018
Reputation: 0
[CA] FLIR M232 and e165
Are the FLIR M232 cameras compatible with the e165 MFDs running lighthouse 2? If so, is it through Wifi or a wired connection? I have 2 e165 screens and I am adding an Axiom Pro RVX. Can I wire the camera to the Axion and also have it wired or wireless to the e165? I understand that I can’t network the Axiom and e165s together due to lighthouse versions, but the e165 screens are at the helm and easily visible where as the Axiom will be in an electronics box overhead and a little less accessible.

Separately, what can I use to share depth data between Axiom and the e165s?

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] FLIR M232 and e165 - tjdurocher - 03-03-18 09:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication