The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] AXIOM Realvision 3D Screen Freezing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM Realvision 3D Screen Freezing
03-05-18, 12:04 PM (This post was last modified: 03-09-18 11:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
jkspain Offline
Junior Member
**
 		Posts: 37
Joined: Apr 2017
Reputation: 0
[CA] AXIOM Realvision 3D Screen Freezing
I have an AXIOM Pro RVX w/ LH 3.2.101 installed (cannot use version 3.3.170 because it does not support my Navionics+ charts)

On a recent fishing trip the AXIOM Pro screen would freeze when displaying Realvision 3D, Sidevision, or Downvision. I have a pair of RV-220 thru hull transducers installed which are connected directly to the AXIOM Pro.

The Sonar displays began working again when returning to shallower water. I have deduced that at depths greater than approximately 150 feet, the display freezes after some period of time and the AXIOM attempts to reboot itself. The display seemed to work reliably at depths less than 125 feet. Please advise?

Jon
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] AXIOM Realvision 3D Screen Freezing - jkspain - 03-05-18 12:04 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication