The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / (DG) P70 connect to SPX30 computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) P70 connect to SPX30 computer
03-06-18, 07:17 AM (This post was last modified: 03-07-18 11:34 AM by Derek - Raymarine - Moderator.)
Post: #1
sailcrazy Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2018
Reputation: 0
(DG) P70 connect to SPX30 computer
How can I connect my P70 control head to my Sea Talk network and SPX30 computer? Previous RayMarine tech advice was to cut the P70 pigtail, strip back the wire, and connect the red(+12vDC), yell(signal), and bare(-12vDC) direct to the computer. I did, and it worked... for several months. Then the P70 quit-would not turn on-so I removed it and reinstalled my old, partially "sunburned screen" ST7001. I sent the P70 back for warranty repair, (they said it was OK and returned it) and bought a P70S. Neither the P70 nor the P70S will turn on when connected(using the "Standby" button), but the old ST7001 controls the AP fine-I just can't read the entire display! How can I turn either the P70 or P70S on? Is there a different/better way to connect the head to the computer?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) P70 connect to SPX30 computer - sailcrazy - 03-06-18 07:17 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication