[CA] FLIR M232 and e165

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum tjdurocher,

Q1. Are the FLIR M232 cameras compatible with the e165 MFDs running lighthouse 2?
A1. Please click here to view a FAQ addressing this subject.

Q2. If so, is it through Wifi or a wired connection?
A2. Communications between the M132 and M232 thermal cameras and a compatible MFD will need to occur via a wired Ethernet Network connection to the system's HS5 RayNet Network Switch or to one of the MFD's Ethernet Network sockets.

Q3. I have 2 e165 screens and I am adding an Axiom Pro RVX. Can I wire the camera to the Axiom and also have it wired or wireless to the e165?
A3. Negative.

Q4. what can I use to share depth data between Axiom and the e165s?
A4. As indicated within the FAQ found here, should the Data Master MFD running LightHouse II software and a Data Master MFD running LightHouse 3 software each be interface as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone then limited communications (i.e. alphanumeric GPS, depth, instrument, navigation, and system state data) will be supported between the MFDs running LightHouse II and LightHouse 3 software.