[CA] AIS700 and E120

[Chuck - Raymarine - Moderator]

laroux,

Q1. If I connect all 4 0183 wires to the AIS700 running at 38400 baud, can/should I reroute the 0183 (running at 4800 baud) from the S3G to the purple and pink wires of the AIS?
A1. Negative. The NMEA 0183 OUT+ and OUT- leads from the autopilot course computer should be interfaced to the AIS700's 4800 BAUD NMEA 0183 IN+(gray) and 4800 BAUD NMEA 0183 IN- (yellow) leads respectively.

Q2. will the data get to the E-120 via the 3840 baud 0183 from the AIS?
A2. If interfaced as specified within my response to Q1, then the system will indeed receive AIS data from the AIS700, as well as heading and rudder angle data from the autopilot course computer.