[CA] AXIOM Realvision 3D Screen Freezing
|
03-09-18, 11:22 AM
(This post was last modified: 03-09-18 11:22 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA] AXIOM Realvision 3D Screen Freezing
Welcome back to the Raymarine Forum Jon,
While I realize that v3.3.170 software may cause issues with the MFD's power swipe and/or use of Navionics cartography, it should have addressed the reported symptoms. It would be recommended the system (updated with v3.3.170 and logs erased) be tested in the manner which you have described while the Navionics chart card is not present within the MFD's memory card reader (... use a LightHouse chart card or no cartography). Should the problem persist, then please save the logs and system logs to a microSD memory card and then attach them to a response to this post. Better yet, sign up to become a Raymarine Product Tester for LightHouse 3 software if you have not done so already. If you have, please let me know and I'll send an endorsement. In this way, it may be possible to permit you to test this problematic scenario with LightHouse v3.4.x software currently in development as well as future releases. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] AXIOM Realvision 3D Screen Freezing - jkspain - 03-05-18, 12:04 PM
RE: [CA] AXIOM Realvision 3D Screen Freezing - Chuck - Raymarine - Moderator - 03-09-18 11:22 AM
RE: [CA] AXIOM Realvision 3D Screen Freezing - jkspain - 03-09-18, 12:21 PM
RE: [CA] AXIOM Realvision 3D Screen Freezing - Chuck - Raymarine - Moderator - 03-09-18, 12:36 PM
|
User(s) browsing this thread: 1 Guest(s)