Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RAY54 > RAY52 Replacement
03-12-18, 10:21 AM
Post: #2
RE: [CA] RAY54 > RAY52 Replacement
Welcome to the Raymarine Forum jrmlsc,

Q1. Is the exchange a simple unplug and replug in the new unit or are their loose wires to attach, etc?
A1. The wiring harness of the Ray54 and Ray52 are not identical. Accordingly, it would not be possible to simply unplug the Ray54's harness from the radio and then plug the Ray52 to the Ray54's harness. However, the Ray52's harness will simply need to be spliced to the corresponding power and NMEA 0183 leads which the Ray54's harness had been wired to.

Q2. I am also assuming that I can switch GPS signals between the 125 and the internal 52 GPS.
A2. Correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] RAY54 > RAY52 Replacement - jrmlsc - 03-12-18, 08:38 AM
RE: [CA] RAY54 > RAY52 Replacement - Chuck - Raymarine - Moderator - 03-12-18 10:21 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)