[CA] deep water and cp200

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] deep water and cp200

03-15-18, 11:09 AM (This post was last modified: 03-15-18 11:10 AM by Chuck - Raymarine - Moderator.)

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA] deep water and cp200

Sallysea,

Our experience has found that when the CPT-200's elements are located in the middle position of the mount, then the CP200 will scan from the surface downward. Accordingly, I would recommend starting with the transducer's elements in this position and then adjusting them if needed. Please click here to view a FAQ addressing addressing the maximum distance for SideVision sonar imaging.

« Next Oldest | Next Newest »

Messages In This Thread

[CA] deep water and cp200 - Sallysea - 03-14-18, 05:25 PM

RE: [CA] deep water and cp200 - Chuck - Raymarine - Moderator - 03-15-18, 09:41 AM

RE: [CA] deep water and cp200 - Sallysea - 03-15-18, 10:38 AM

RE: [CA] deep water and cp200 - Chuck - Raymarine - Moderator - 03-15-18 11:09 AM

RE: [CA] deep water and cp200 - Sallysea - 03-23-18, 01:17 PM

RE: [CA] deep water and cp200 - Chuck - Raymarine - Moderator - 03-23-18, 02:02 PM

RE: [CA] deep water and cp200 - Sallysea - 03-23-18, 03:23 PM

RE: [CA] deep water and cp200 - Chuck - Raymarine - Moderator - 03-23-18, 03:31 PM

User(s) browsing this thread: 1 Guest(s)