The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Axiom waypoint info

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom waypoint info
03-22-18, 09:10 AM (This post was last modified: 03-22-18 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
Canadian Bassin Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2018
Reputation: 0
[CA] Axiom waypoint info
I’ve recently purchased 2 Axiom 9’s and have them connected with a Raynet Cable. I have one unit at the console and one at the bow. I’ve made the unit at the console the data master. My question is, once the units are connected, does the unit at the bow record and follow waypoints from the master units antenna that is 6-7 feet away?. I just was sure if I had to make the bow unit the master when fishing on the front deck for more accuracy?.

Thank you in advance for assistance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom waypoint info - Canadian Bassin - 03-22-18 09:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication