The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Interfacing E series classic to E series Hybrid

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Interfacing E series classic to E series Hybrid
03-23-18, 08:12 AM (This post was last modified: 03-23-18 08:47 AM by Derek - Raymarine - Moderator.)
Post: #1
mcduck52 Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2018
Reputation: 0
(DG) Interfacing E series classic to E series Hybrid
"While it is possible to interface an E-Series Classic MFD to a common SeaTalkng backbone to which a C/E-Series Widescreen MFD also been interfaced" this is a quote from an earlier thread. I wish to perform this interface and would like to have the proceedure described. There is an adapter cable that converts the NMEA183 plug to Seatalkng cable. Is the proceedure simply to run the extended ng cable to the existing backbone connected to the existing E series widescreen Hybrid? A friend suggested that the ng must first be connected to an instrument or display that converts the data to a readable format for the classic. Is that correct, or may I simply run direct?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) Interfacing E series classic to E series Hybrid - mcduck52 - 03-23-18 08:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication